The three decisions
Every interior style reduces to the same three choices, made differently:
- Material — what the surfaces actually are. Timber, stone, plaster, textile, metal.
- Colour — which hues, and in what proportion.
- Finish — matt or gloss, smooth or textured, raw or sealed.
Most people spend almost all their attention on the second one, which is backwards. Material and finish are harder to change later, cost more, and do more to define the room. Colour is the cheapest of the three and the easiest to redo.
Undertone is the thing nobody mentions
Pick up five white paint cards and they all look white. Put them next to each other and one is pink, one is green, one is yellow, one is blue and one is genuinely neutral. That hidden colour is the undertone, and it is the single most common reason a scheme that looked right on paper feels wrong in the room.
It matters because undertones either agree or fight. A warm yellow-based white against a cool grey-based floor looks like a mistake even though neither element is wrong. A warm white against a warm oak looks like one decision.
How to check. Put the actual samples next to each other, in the actual room, in daylight. Not on a screen, not in a shop. Paint card against floor sample against worktop offcut against the existing woodwork. Whichever one looks odd in that group is the one to change.
A quick rule of thumb: decide early whether the whole scheme is warm or cool, write it down, and hold the line. Mixed temperature is what makes a room feel unresolved without anyone being able to say why.
Proportion: 60 / 30 / 10
Roughly 60 per cent of what you see in the dominant colour — usually walls and large surfaces. Roughly 30 in a secondary — flooring, large furniture. Roughly 10 in an accent — textiles, art, one piece of furniture.
It is not a rule so much as a diagnostic. When a room feels busy, the accent is usually taking 30 per cent. When it feels flat, there is no accent at all.
Sheen
Sheen is a functional decision that people treat as an aesthetic one.
| Finish | Where it belongs | What it does |
|---|---|---|
| Dead flat / matt | Ceilings, most walls | Hides unevenness, absorbs light, marks easily |
| Eggshell | Woodwork, hallways | Light sheen, wipeable, shows some defects |
| Satin | Woodwork, kitchens, bathrooms | Durable and wipeable, shows most defects |
| Gloss | Joinery, doors, trim as a feature | Very durable, shows absolutely everything |
The trade-off runs one way: the more sheen, the more it wipes clean and the more it reveals what is underneath. On an old wall that has been filled and refilled, matt is not a style preference, it is damage control.
A useful move: same colour, two sheens. Matt on the walls, eggshell on the woodwork. The difference shows only as light moves across the surface, which gives a single-colour room its structure.
The techniques worth knowing
Colour drenching. Walls, ceiling, skirting, architrave and sometimes the doors all in one colour. The edges of the room stop announcing themselves, which makes a small room feel larger and a busy one feel calm. Costs nothing extra — it is the same paint on more surfaces — and it is the highest-impact decorating decision available.
Limewash and mineral paint. A chalky breathable finish with slight natural variation in the colour. That variation is the whole value: it gives a flat wall depth that plastic emulsion cannot. Worth the extra on a wall you look at every day, pointless on a hallway nobody studies.
Panelling. Tongue and groove, shiplap, or applied beading on a flat wall. Adds texture and shadow without adding colour, works in almost every style, and is one of the few genuinely cheap high-impact interventions. Paint it the same colour as the wall rather than a contrast.
Microcement and polished plaster. Seamless, matt, slightly variable surfaces applied a few millimetres thick over an existing substrate. The result depends almost entirely on the applicator's skill, so this is a trade job and the quotes vary for good reason.
Two-tone walls. A darker colour to about two-thirds height with a lighter one above, or the reverse. Lowers a ceiling that feels too high, and gives a plain room a horizontal line.
Colour blocking. A shape of colour that ignores the architecture — a painted arch behind a bed, a block around a doorway. Cheap, reversible and genuinely effective in a rental or a child's room.
Wall washing with light. Lighting aimed along a surface rather than down into the room. It reveals texture; downlights flatten it. If you have paid for limewash or panelling, this is what makes the money visible.
Lighting temperature, which decides all of it
Every colour decision you make is conditional on the light you view it under.
Warm white, around 2700 K, is what domestic rooms generally want. It flatters timber, warm neutrals and skin. Cool white, 4000 K and above, makes warm palettes look grey and dirty and is the reason many carefully chosen schemes feel wrong at night.
Test paint under the bulbs you will actually live with, at the time of day you will actually be in the room. A colour chosen in a daylit showroom and lived with under cool LEDs is two different colours.
Before you sand anything old
Two cautions that sit outside decoration and inside safety.
Paint in homes built before the late 1970s may contain lead, and sanding or heat-stripping it releases the hazard. Textured coatings, board and floor tiles in buildings from roughly the 1930s to the 1990s may contain asbestos, which is harmless undisturbed and dangerous once broken up.
Both are a testing question, not a judgement call, and there are legal rules in many countries for disturbing either. Find out what you have before the sander comes out.
Common questions
- What is the 60/30/10 rule?
- A proportion guide: roughly 60 per cent of the visible surface in a dominant colour, 30 in a secondary one, 10 in an accent. It is not a law, but it is a reliable diagnostic — when a scheme feels wrong, the proportions are usually the reason rather than the colours.
- What is an undertone and why does it matter?
- The colour hiding inside a neutral. Two whites can both look white on a card and read as pink and green next to each other. Undertone is what decides whether your paint, floor and worktop look like one scheme or three, and it is invisible until the pieces are side by side.
- How big should a paint sample be?
- At least A3, ideally a square metre, two coats, on more than one wall. Look at it in the morning, in the afternoon and at night under your own bulbs. A small patch next to an existing colour tells you almost nothing, because your eye reads it against the old colour.
- What sheen should I use where?
- Matt on ceilings and most walls, because it hides unevenness. Eggshell or satin on woodwork and in bathrooms and kitchens where it needs wiping. The more sheen, the more it wipes and the more it shows every defect underneath.
