Renovation Field Guide

Renovation calculators

Each one shows its working, tells you where a figure is a rule of thumb rather than a fact, and warns you when a number you have entered is optimistic.

A kitchen detail with a dark timber cabinet, marble splashback and a matt black tap.

These run entirely in your browser. Nothing you type is sent anywhere, there is nothing to sign up for, and every one of them switches between metric and feet-and-inches.

A word on what they are for. A calculator can tell you that your bathroom walls come to 18.4 m² and that 600 × 300 mm tile at 12% waste means 112 tiles. It cannot tell you whether the wall behind them is sound, whether the waterproofing is right, or whether that layout needs a permit. Use these for the arithmetic and a qualified trade for the judgement.

Which one you need

For a surface, pick by material: tile, paint, flooring, wallpaper or plasterboard. They all want a width and a height, so do the measuring once and reuse the numbers.

For the structure rather than the finish: concrete for slabs, footings and post holes, insulation for packs and the R-value you actually end up with, decking for boards and joists, and skirting and architrave for the trim at the end of the job.

For a whole project rather than a surface, the budget planner adds up quotes and materials and tells you where the contingency should sit, and the order planner turns your project into a phase list in dependency order. Both are the practical end of the budget guide and the order of operations.